Products catalogue
|
Вторник, 04 Декабрь 2007 |
|
Газоанализатор
– многоканальный стационарный прибор, предназначенный для непрерывного
автоматического измерения объемной доли метана, пропана, массовой концентрации
угарного газа (монооксида углерода) в воздушной атмосфере жилых, административных,
производственных зданий, сооружений, и наружных установок и выдачи сигнализации
о превышении установленных значений концентраций контролируемых газов.
|
|
Last Updated ( Понедельник, 10 Декабрь 2007 )
|
|
Read more...
|
|
|
Среда, 03 Октябрь 2007 |
 Gas analyzer – multi-channeled, stationary, explosion-proof device, designed for continuous automatic measurement of Methane and Propane Volume fractures, Carbon Monoxide (waste gas) and chlorine mass concentration in the atmospheric air of the residential, administrative, industrial buildings, facilities and outside based devices and Units, and signaling about the over-concentration of controlled gases.
|
|
Last Updated ( Среда, 03 Октябрь 2007 )
|
|
Read more...
|
|
|
Вторник, 14 Ноябрь 2006 |
|
 Multi-gas portative gas analyzer designed for synchronus selective measurement and control of content of several toxic, inflammable gases and oxygen.
Area of using:
- allows to detect gases during technical works and inspection of wells of buried plants and heating network, water-supply equipment and sewerage systems;
- allows to detect leaks and localize places of escape of proper gases;
- for certification of working places on air content;
- for ecological monitoring.
|
|
Last Updated ( Понедельник, 12 Февраль 2007 )
|
|
Read more...
|
|
|
Вторник, 14 Ноябрь 2006 |
 Gas analyzer FP 11.2K – measuring explosion-proof device with digital indication, light and voice signalization and built-in micropump. Gas analyzer FP 11.2K designed for measuring volume fraction of one of inflamable gases(methane, propane or oxygen) in air and light and sound signalization in case of volume fraction bounds violation. The device is used for control of gase cocentration in air in industial buildings, wells, cellars, holec etc. where dangerous and highly explosive gases categories IIА, IIВ, IIС, groups Т1...Т5 according GOST 12.1.011 can be found. Gas analyzer calibrating is available for methane and propane.
|
|
Last Updated ( Вторник, 14 Ноябрь 2006 )
|
|
Read more...
|
|
|
Вторник, 19 Июль 2005 |
 FST-04 is a stationery device designed for constant automatic measuring volume fraction of carbon monoxide(CO), inflamable gases(methane and propane) in athmosphere of boiler-rooms, industrial and municipal buildings and signalizing about measured gases volume fraction exceeding. The device consists of power module, signalization module, CO concentration measuring module(built-in detector) and remote methane and propane detector.
|
|
Last Updated ( Пятница, 28 Апрель 2006 )
|
|
Read more...
|
|
|
Вторник, 19 Июль 2005 |
 Gaz analyzer FP21 – measuring explosion-proof device with digital indication, light and voice signalization and diffusive input of analyzed medium. Gas analyzer FP21 is designed for measuring propane volume fraction of one of inflamable gases(methane, propane) in air and light and voice signalization in case of capacity rates bounds violation. The device is used for control of gase cocentration inside industial buildings, wells, cellars, holec etc where dangerous and highly explosive mixtures can be found. FP21 is designed to operate at -30 to +50 oС. Extent of protection of electronical block IP20. Extent of protection of accumulator block IP54. FP21 is marked with ”1Ех[ib]dIICТ5 X” and can be used in explosive areas.
|
|
Last Updated ( Понедельник, 12 Февраль 2007 )
|
|
Read more...
|
|
|
Вторник, 19 Июль 2005 |
  Portative, diffusive leak detectors no-explosive-proof (FT-02B2) and explosive-proof (FT-02B1) performance, made for locating leakages of natural and liquefied gases from gas pipelines, stop valve, domestic gas-stoves, automobile gas plants etc. The devices are remarkable for solid, compact and ergonomic frame, easy operating and service and they are not subject to comprehensive state verification.
FT-02B1 are marked with ”1Ех[ib]dIICТ5 X” and can be used in explosive areas.
|
|
Last Updated ( Вторник, 24 Март 2009 )
|
|
Read more...
|
|
|
Среда, 25 Май 2005 |
Gas – analyzers FP-11.1, FP-11.2 – designed for the inflammable gases before-explosive concentration measurement in the air of industrial buildings, wells, cellars, holes and etc
|
|
Last Updated ( Понедельник, 03 Июль 2006 )
|
|
Read more...
|
|
|
Среда, 25 Май 2005 |
|
Gas – analyzer FP-10 - designed for oxygen (O2) measurement in the air of industrial buildings, wells, cellars, holes, reservoirs, cisterns, gas and product pipelines; during routine maintenance, repair-and-renewal operations, rescue operations and etc.
|
|
Last Updated ( Понедельник, 03 Июль 2006 )
|
|
Read more...
|
|
|
Среда, 25 Май 2005 |
 Application: The leak detector-indicator FP-12 allows to determine and localize inflammable gases escape, to estimate the level of gas content in gas-distributing stations, cellars, wells and other gas objects as well as to find inflammable gases escape undeground.
|
|
Last Updated ( Вторник, 02 Октябрь 2007 )
|
|
Read more...
|
|
|
Среда, 04 Май 2005 |
|
 Technological adapter for devices service and calibration TecAd is a device designed for adjustment, calibrating and maintenance of devices produced by NPODO “Pharmec”. TecAd is reccomended to organizations that are practicing service and maintenance of devices produced by NPODO “Pharmec”. The adapter is a bridge between PC and device. Using TecAd you can get all the unformation about internal device specifications(detector voltage, accumulator battery voltage etc), internal flags(errors, detector breakdown) and you can calibrate the device(record gas concentration, turn-off limits etc).
Manual included.
|
|
Last Updated ( Пятница, 28 Апрель 2006 )
|
|
Read more...
|
|
|
Воскресенье, 26 Сентябрь 2004 |
|
.jpg "Image") Technological adapter for devices service and calibration TecAd is a device designed for adjustment, calibrating and maintenance of devices produced by NPODO “Pharmec”. TecAd is reccomended to organizations that are practicing service and maintenance of devices produced by NPODO “Pharmec”. The adapter is a bridge between PC and device. Using TecAd you can get all the unformation about internal device specifications(detector voltage, accumulator battery voltage etc), internal flags(errors, detector breakdown) and you can calibrate the device(record gas concentration, turn-off limits etc).
Manual included.
|
|
Last Updated ( Среда, 03 Октябрь 2007 )
|
|
Read more...
|
|
|
|
Products catalogue 
